Canon PowerShot SX500 IS User Manual Download

Page: 3 / 228

Compatible Memory Cards

The following memory cards (sold separately) can be used, regardless of

capacity.

•

SD memory cards*

•

SDHC memory cards*

•

SDXC memory cards*

•

Eye-Fi cards

* Conforms to SD specifications. However, not all memory cards have been verified to

work with the camera.

About Eye-Fi Cards

This product is not guaranteed to support Eye-Fi card functions (including

wireless transfer). In case of an issue with an Eye-Fi card, please check

with the card manufacturer.

Also note that an approval is required to use Eye-Fi cards in many countries

or regions. Without approval, use of the card is not permitted. If it is unclear

whether the card has been approved for use in the area, please check with

the card manufacturer.

COP

Summary of Contents for PowerShot SX500 IS





































































































































































































































Search results

Summary of Contents for PowerShot SX500 IS

Reviews:

Related manuals for PowerShot SX500 IS

Brands by name

Popular brands

Canon PowerShot SX500 IS, User Manual

Search results

Summary of Contents for PowerShot SX500 IS

Reviews:

Related manuals for PowerShot SX500 IS

Brands by name

Popular brands