Canon PowerShot SX260 HS User Manual Download Page 193

Page: 193 / 246

Adjusting Basic Camera Functions

193

If you accidentally change a setting, you can restore default camera settings.

Access the [Reset All] screen.

Choose [Reset All], and then press the

button.

Restore default settings.

Press the

buttons or turn the

dial to

choose [OK], and then press the

button.

Default settings are now restored.

Restoring Defaults

•

The following functions are not restored to default settings.

tab settings [Date/Time] (p. 18), [Language

] (p. 20), [Time Zone]

(p. 189), [Vide o System] (p. 199), and the image assigned to [Start-up Image]
(p. 184)

Custom white balance data you have recorded (p. 121)

Colors chosen in Color Accent (p. 108) or Color Sw ap (p. 109)

Shooting direction chosen in Stitch Assist mode (p. 102)

The shooting mode (p. 38)

Shooting mode chosen in

(p. 93) or

(p. 103) mode

The movie mode (p. 111)

Information registered using Face ID (p. 69)

Date and time as updated using GPS Auto Time (p. 51)

SX260 HS

C OP

Summary of Contents for PowerShot SX260 HS























































































































































































































































Search results

Summary of Contents for PowerShot SX260 HS

Reviews:

Brands by name

Popular brands

Canon PowerShot SX260 HS, User Manual

Search results

Summary of Contents for PowerShot SX260 HS

Reviews:

Brands by name

Popular brands