Canon PowerShot SX260 HS User Manual Download Page 184

Page: 184 / 246

Adjusting Basic Camera Functions

184

Adjust screen brightness as follows.

Choose [LCD Brightness], and then press the

buttons to adjust the brightness.

Customize the start-up screen shown after you turn the camera on as follows.

Choose [Start-up Image], and then press the

button.

Press the

buttons or turn the

dial to

choose an option.

Screen Brightness

•

For maximum brightness, press and hold the

button for at least two

seconds when the shooting screen is displayed or when in single-image display.
(This will override the [LCD Brightness] setting on the

tab.) To restore the

original brightness, press and hold the

button again for at least two

seconds or restart the camera.

Start-up Screen

No start-up image

Preset images
(cannot be modified)

Preset images
Assign desired shots, or use the included
software to change the image.

COP

Summary of Contents for PowerShot SX260 HS























































































































































































































































Search results

Summary of Contents for PowerShot SX260 HS

Reviews:

Brands by name

Popular brands

Canon PowerShot SX260 HS, User Manual

Search results

Summary of Contents for PowerShot SX260 HS

Reviews:

Brands by name

Popular brands