Canon PowerShot SX260 HS User Manual Download Page 124

Page: 124 / 246

Color and Continuous Shooting

124

Hold the shutter button all the way down to shoot continuously.

Configure the setting.

Press the

button, choose

in the menu,

and choose the desired option (p. 39).

The option you configured is now displayed.

Shoot.

Hold the shutter button all the way down to
shoot continuously.

* In

mode (p. 94), AF lock (p . 133), or manual focus mode (p. 125),

is changed to

* For details on the continuous shooting speed in each mode, see “Specifications” in the

Getting Started

guide.

Continuous Shooting

Still Images

Mode

Description

Continuous

Continuous shooting, with the focus and exposure determined
when you press the shutter button halfway.

Continuous
Shooting AF

Continuous shooting and focusing.
[AF Frame] is set to [Center] and cannot be changed.

Continuous
Shooting LV

Continuous shooting, with the focus fixed at the position
determined in manual focusing. In

mode, focus is determined

by the first shot.

•

Cannot be used with the self-timer (p. 64) or [Blink Detection] (p. 86).

•

Shooting may stop momentarily or continuous shooting may slow
down depending on shooting conditions, camera settings, and the
zoom position.

•

As more shots are taken, shooting may slow down.

•

Shooting may slow down if the flash fires.

•

If you use Face ID (p. 69) in

, the name recorded in the image will be fixed to

the location where it is displayed in the first shot. Even if the subject moves, the
name will stay fixed in the same position for any subsequent shots.

COP

Summary of Contents for PowerShot SX260 HS























































































































































































































































Search results

Summary of Contents for PowerShot SX260 HS

Reviews:

Brands by name

Popular brands

Canon PowerShot SX260 HS, User Manual

Search results

Summary of Contents for PowerShot SX260 HS

Reviews:

Brands by name

Popular brands