Canon PowerShot S110 Digital ELPH User Manual Download Page 190

Page: 190 / 346

190

Shooting Range and Focusing

Still Images

Choosing a Person to Focus On (Face Select)

You can shoot after choosing a specific person’s face to focus on.

Prepare the camera for Face

Select.

Set the AF frame to [Face AiAF] (

184).

Assign [ ] to the <

> button (

211).

Enter Face Select mode.

Aim the camera at the person’s face and

press the <

> button.

After [Face Select : On] is displayed, a

face frame [ ] is displayed around the

face detected as the main subject.

Even if the subject moves, the face frame

[ ] follows the subject within a certain

range.

Choose the face to focus on.

To switch the face frame [ ] to another

detected face, press the <

> button.

After you have switched the face frame

to all detected faces, [Face Select : Off]

is displayed, and the specified AF frame

mode screen is displayed again.

Shoot.

Press the shutter button halfway. After the

camera focuses, [ ] changes to [ ].

Press the shutter button all the way down

to shoot.

•

When [Face ID] is set to [On], names of any registered people detected are

not displayed when you have selected another, unregistered face to focus

on. However, their names will be recorded in the still images (

113).

COP

Summary of Contents for PowerShot S110 Digital ELPH



























































































































































































































































































































































Search results

Summary of Contents for PowerShot S110 Digital ELPH

Reviews:

Related manuals for PowerShot S110 Digital ELPH

Brands by name

Popular brands

Canon PowerShot S110 Digital ELPH, User Manual

Search results

Summary of Contents for PowerShot S110 Digital ELPH

Reviews:

Related manuals for PowerShot S110 Digital ELPH

Brands by name

Popular brands