manualshive.com logo in svg

Canon Powershot Pro90 IS, Software Starter Manual

Share
Download
Canon Powershot Pro90 IS Software Starter Manual Download Page 91

Replaying   

89

Adjusting the Play Time and Repeat Settings

You can change the play time for all the images in a show and have the show
repeat itself continuously.

1

Display the slide show menu.

2

Press the 

 or 

 arrow on the omni

selector to select [Set up] and press the
Set button.

3

Press the 

 or 

 arrow on the omni

selector to select [Play Time] or [Repeat].

4

Press the 

 or 

 arrow on the omni

selector to select a setting.

Play Time

• Select a play time with the 

 or 

 arrow on

the omni selector.

Repeat

• Select [On] or [Off] with the 

 or 

 arrow

on the omni selector.

5

Press the Menu button.

• The set up menu will close.

Sets the duration that each image in a slide show is displayed. The options are any one of 3-10 
seconds, 15 seconds, 30 seconds and Manual.

Sets whether the slide show stops when all the slides have been displayed or continues to display 
until stopped.

Play Time

Repeat

• The display interval may vary somewhat for some images.
• Slide shows can be easily edited on a computer with the supplied software. See

the 

Software Starter Guide

.

Summary of Contents for Powershot Pro90 IS













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands