Canon PowerShot G15 User Manual Download Page 99

Page: 99 / 316

Image Effects (Creative Filters)

Add a variety of effects to images when shooting.

Enter < > mode.

Set the mode dial to < >.

Choose a shooting mode.

Press the <

> button, choose [ ] in

the menu, and then choose a shooting

mode (

47).

Shoot.

Still Images

Movies

Shoot in vivid colors (Super

Vivid)

Shots in rich, vivid colors.

Still Images

Movies

Posterized shots (Poster Effect)

Shots that resemble an old poster or

illustration.

•

In [ ] and [ ] modes, try taking some test shots first, to make

sure you obtain the desired results.

COP

Summary of Contents for PowerShot G15





























































































































































































































































































































Search results

Summary of Contents for PowerShot G15

Reviews:

Brands by name

Popular brands

Canon PowerShot G15, User Manual

Search results

Summary of Contents for PowerShot G15

Reviews:

Brands by name

Popular brands