Canon PowerShot G15 User Manual Download Page 47

Page: 47 / 316

FUNC. Menu

Configure commonly used shooting functions through the FUNC. menu as

follows.

Note that menu items and options vary depending on the shooting mode

(

292 – 295).

Access the FUNC. menu.

Press the <

> button.

Menu Items

Options

Choose a menu item.

Press the <

> buttons to choose a

menu item.

Available options are shown at the bottom

of the screen.

Choose an option.

Press the <

> buttons or turn the

> dial to choose an option.

Options labeled with a [

] icon can be

configured by pressing the <

button.

Finish the setup process.

Press the <

> button.

The screen before you pressed the

> button in step 1 is displayed again,

showing the option you configured.

•

To undo any accidental setting changes, you can restore the camera’s

default settings (

231).

COP

Summary of Contents for PowerShot G15





























































































































































































































































































































Search results

Summary of Contents for PowerShot G15

Reviews:

Brands by name

Popular brands

Canon PowerShot G15, User Manual

Search results

Summary of Contents for PowerShot G15

Reviews:

Brands by name

Popular brands