Canon PowerShot G15 Page 82 User Manual Download

Page: 82 / 316

Image Customization Features

Still Images

Red-Eye Correction

Red-eye that occurs in the flash photography can be automatically

corrected as follows.

Access the [Built-in Flash

Settings] screen.

Press the <

> button, choose [Flash

Control] on the [

] tab, and then press

the <

> button (

48).

Configure the setting.

Choose [Red-Eye Corr.], and then

choose [On] (

48).

Once the setting is complete, [

] is

displayed.

To restore the original setting, repeat this

process but choose [Off].

•

Red-eye correction may be applied to image areas other than

eyes (if the camera misinterprets red eye makeup as red pupils,

for example).

•

You can also correct existing images (

211).

•

You can also access the screen in step 2 by holding down the <

> button for

at least one second.

•

You can also access the screen in step 2 when the flash is up by pressing

the <

> button and immediately pressing the <

> button.

COP

Summary of Contents for PowerShot G15





























































































































































































































































































































Search results

Summary of Contents for PowerShot G15

Reviews:

Related manuals for PowerShot G15

Brands by name

Popular brands

Canon PowerShot G15, User Manual

Search results

Summary of Contents for PowerShot G15

Reviews:

Related manuals for PowerShot G15

Brands by name

Popular brands