Canon PowerShot G15 User Manual Download Page 211

Page: 211 / 316

211

Editing Still Images

Still Images

Correcting Red-Eye

Automatically corrects images affected by red-eye. You can save the

corrected image as a separate file.

Choose [Red-Eye Correction].

Press the <

> button, and then

choose [Red-Eye Correction] on the [

]

tab (

48).

Choose an image.

Press the <

> buttons or turn the

> dial to choose an image.

Correct the image.

Press the <

> button.

Red-eye detected by the camera is now

corrected, and frames are displayed

around corrected image areas.

Enlarge or reduce images as needed.

Follow the steps in

189.

Save as a new image and

review.

Press the <

> buttons or

turn the <

> dial to choose [New File],

and then press the <

> button.

The image is now saved as a new file.

Follow step 5 on

207.

COP

Summary of Contents for PowerShot G15





























































































































































































































































































































Search results

Summary of Contents for PowerShot G15

Reviews:

Canon PowerShot G15, User Manual, Page: 211 / 316

Search results

Summary of Contents for PowerShot G15

Reviews: