Canon PowerShot G15 Page 81 User Manual Download

Page: 81 / 316

Image Customization Features

Still Images

Changing Image Resolution (Size)

Choose from 4 levels of image resolution, as follows. For guidelines on

how many shots at each resolution setting can fit on a memory card, see

“Specifications” (

303).

Configure the setting.

Press the <

> button, choose [ ] in

the menu, and choose the desired option

(

47).

The option you configured is now

displayed.

To restore the original setting, repeat this

process but choose [ ].

Guidelines for Choosing Resolution Based on Paper

Size (for 4:3 Images)

A2 (16.5 x 23.4 in.)

A3 – A5 (11.7 x

16.5 – 5.8 x 8.3 in.)
5 x 7 in.

Postcard

3.5 x 5 in.

[ ]: For e-mailing images.

COP

Summary of Contents for PowerShot G15





























































































































































































































































































































Search results

Summary of Contents for PowerShot G15

Reviews:

Related manuals for PowerShot G15

Brands by name

Popular brands

Canon PowerShot G15, User Manual

Search results

Summary of Contents for PowerShot G15

Reviews:

Related manuals for PowerShot G15

Brands by name

Popular brands