Canon PowerShot G15 Page 272 User Manual Download

Page: 272 / 316

272

Printing Images

Still Images

Adding Images Individually

Choose [Select].

Following the previous procedure, choose

[Select] and press the <

> button.

Choose an image.

Press the <

> buttons or turn the

> dial to choose an image, and then

press the <

> button.

[ ] is displayed.

To remove the image from the photobook,

press the <

> button again. [ ] is no

longer displayed.

Repeat this process to specify other

images.

When finished, press the <

> button

to return to the menu screen.

Still Images

Adding All Images to a Photobook

Choose [Select All Images].

Following the procedure on

272,

choose [Select All Images] and press the

> button.

Configure the print settings.

Press the <

> buttons or turn the

> dial to choose [OK], and then press

the <

> button.

COP

Summary of Contents for PowerShot G15





























































































































































































































































































































Search results

Summary of Contents for PowerShot G15

Reviews:

Related manuals for PowerShot G15

Brands by name

Popular brands

Canon PowerShot G15, User Manual

Search results

Summary of Contents for PowerShot G15

Reviews:

Related manuals for PowerShot G15

Brands by name

Popular brands