Canon PowerShot G15 Page 147 User Manual Download

Page: 147 / 316

147

Shooting Range and Focusing

Still Images

Moving and Resizing AF Frames (FlexiZone)

When you want to change the position or size of the AF frame, set the AF

frame mode to [FlexiZone] (

146).

Prepare to move the AF frame.

Press the < > button. The AF frame

turns orange.

Move and resize the AF frame.

Turn the <

> dial to move the AF frame,

or press the <

> buttons

to move it by a smaller amount.

To return the AF frame to the original

position in the center, keep the < >

button held down.

To reduce the AF frame size, press the

> button. Press it again to restore

it to the original size.

Finish the setup process.

Press the < > button.

•

AF frames are displayed at normal size when you use the digital

zoom (

63) or digital tele-converter (

144), and in manual

focus mode (

142).

•

You can also link the Spot AE Point frame to the AF frame (

128).

COP

Summary of Contents for PowerShot G15





























































































































































































































































































































Search results

Summary of Contents for PowerShot G15

Reviews:

Related manuals for PowerShot G15

Brands by name

Popular brands

Canon PowerShot G15, User Manual

Search results

Summary of Contents for PowerShot G15

Reviews:

Related manuals for PowerShot G15

Brands by name

Popular brands