Canon PowerShot G15 Page 144 User Manual Download

Page: 144 / 316

144

Shooting Range and Focusing

Still Images

Movies

Digital Tele-Converter

The focal length of the lens can be increased by approximately 1.5x or 2.0x.

This can reduce camera shake because the shutter speed is faster than it

would be if you zoomed (including using digital zoom) in to the same zoom

factor.

Press the <

> button, choose

[Digital Zoom] on the [

] tab, and then

choose the desired option (

48).

The view is enlarged and the zoom factor

is displayed on the screen.

•

The digital tele-converter cannot be used with digital zoom

(

63) and AF-point zoom (

87).

•

The respective focal lengths when using [1.5x] and [2.0x] are 42.0 –

210.0 mm and 56.0 – 280.0 mm (35mm film equivalent).

•

The shutter speed may be equivalent when you move the zoom lever all the

way toward <

> for maximum telephoto, and when you zoom in to enlarge

the subject to the same size following step 2 on

63.

COP

Summary of Contents for PowerShot G15





























































































































































































































































































































Search results

Summary of Contents for PowerShot G15

Reviews:

Related manuals for PowerShot G15

Brands by name

Popular brands

Canon PowerShot G15, User Manual

Search results

Summary of Contents for PowerShot G15

Reviews:

Related manuals for PowerShot G15

Brands by name

Popular brands