Canon PowerShot G1 X, User Manual, Page: 85 / 242

Special Modes for Other Purposes
85
You can shoot a series of shots in rapid succession by holding the shutter button
all the way down. For details on continuous shooting speed, and maximum
number of continuous shots, see “Continuous Shooting Speed” (see
“Specifications” in the
Getting Started guide).
HQ: High Quality
Choose .
z
Follow steps 1 – 2 on p. 68 and choose .
Shoot.
X
Hold the shutter button all the way down to
shoot continuously.
z
Shooting stops when you release the shutter
button or reach the maximum number of
shots, after which [Busy] is displayed and the
shots are shown in the order you took them.
Each set of images shot continuously is managed as a single group, and only
the first image in that group will be displayed. To indicate that the image is
part of a group,
is displayed in the upper left of the screen.
High-Speed Continuous Shooting (High-speed
Burst HQ)
Still Images
• Focus, image brightness, and color are determined by the first shot.
• The screen is blank while you are shooting.
• There may be a delay after continuous shooting before you can shoot again.
Additionally, depending on the memory card, there may be a delay before you
can shoot again. Speed Class 6 or higher memory cards are recommended.
• Shooting may slow down depending on shooting conditions, camera settings,
and the zoom position.
Images Displayed During Playback
• If you erase a grouped image (p. 152), all images in the group are
also erased. Be careful when erasing images.
COP
Y