Canon PowerShot ELPH 530 HS Page 159 User Manual Download

Page: 159 / 214

Adjusting Basic Camera Functions

159

Change the display language as needed.

Access the Language screen.

Touch [Language

Configure the setting.

Touch a display language to choose it, and
then touch

The following settings can also be adjusted on the

tab.

•

[Video System] (p. 165)

•

[Ctrl via HDMI] (p. 166)

•

[Eye-Fi Settings] (p. 184)

If you accidentally change a setting, you can restore default camera settings.

Access the [Reset All] screen.

Touch [Reset All].

Restore default settings.

Touch [OK].

Default settings are now restored.

Display Language

•

You can also access the Language screen in Playback mode by touching

and then touching and holding

Adjusting Other Settings

Restoring Defaults

ELPH 320 HS

IXUS 240 HS

COP

Summary of Contents for PowerShot ELPH 530 HS























































































































































































































Search results

Summary of Contents for PowerShot ELPH 530 HS

Reviews:

Related manuals for PowerShot ELPH 530 HS

Brands by name

Popular brands

Canon PowerShot ELPH 530 HS, User Manual

Search results

Summary of Contents for PowerShot ELPH 530 HS

Reviews:

Related manuals for PowerShot ELPH 530 HS

Brands by name

Popular brands