Canon PowerShot ELPH 330 HS User Manual Download Page 94

Page: 94 / 178

1
2
3
4

6
7
8
9

Preliminary Notes and

Legal Information
Contents: Basic

Operations

Camera Basics
Auto Mode/Hybrid

Auto Mode
Other Shooting

Modes

Wi-Fi Functions

Setting Menu

Accessories

Appendix

Index

Basic Guide

P Mode

Cover

Advanced Guide

Playback Mode

Using the Menu

Access the setting screen.

Press the <

> button and choose

[Protect] on the [

] tab (

29).

Choose a selection method.

Choose a menu item and a setting as

desired (

29).

To return to the menu screen, press the

> button.

Choosing Images Individually

Choose [Select].

Following step 2 in “Using the Menu”

(

94), choose [Select] and press the

> button.

Choose an image.

Press the <

> buttons to choose an

image, and then press the <

> button.

[

] is displayed.

To cancel selection, press the <

button again. [

] is no longer displayed.

Repeat this process to specify other

images.

Protect the image.

Press the <

> button. A

confirmation message is displayed.

Press the <

> buttons to choose

[OK], and then press the <

> button.

•

Images will not be protected if you switch to Shooting mode or turn

the camera off before finishing the setup process in step 3.

Selecting a Range

Choose [Select Range].

Following step 2 in “Using the Menu”

(

94), choose [Select Range] and

press the <

> button.

Choose a starting image.

Press the <

> button.

Press the <

> buttons to choose an

image, and then press the <

> button.

COP

Summary of Contents for PowerShot ELPH 330 HS



















































































































































































Search results

Summary of Contents for PowerShot ELPH 330 HS

Reviews:

Related manuals for PowerShot ELPH 330 HS

Brands by name

Popular brands

Canon PowerShot ELPH 330 HS, User Manual

Search results

Summary of Contents for PowerShot ELPH 330 HS

Reviews:

Related manuals for PowerShot ELPH 330 HS

Brands by name

Popular brands