Canon PowerShot D30, User Manual

Page: 78 / 153

Before Use
Basic Guide
Advanced Guide
Camera Basics
Using GPS
Functions
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
78
Before Use
Basic Guide
Advanced Guide
Camera Basics
Using GPS
Functions
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
•
FE: Flash Exposure
Still Images Movies
Changing the IS Mode Settings
1
Access the setting screen.
z z
Press the <
n
> button, choose
[IS Settings] on the [
4
] tab, and then
press the <
m
> button (
=
26 ).
2
Configure the setting.
z z
Choose [IS Mode], and then choose the
desired option (
=
26 ).
Continuous
Optimal image stabilization for the shooting conditions is automatically
applied (Intelligent IS) (
=
39 ).
Shoot Only* Image stabilization is active only at the moment of shooting.
Off Deactivates image stabilization.
* The setting is changed to [Continuous] for movie recording.
•
If image stabilization cannot prevent camera shake, mount the
camera on a tripod or take other measures to hold it still. In this
case, set [IS Mode] to [Off].
Movies
Deactivating Powered IS
Powered IS reduces slow camera shake that may occur when recording
telephoto movies. However, this option may not produce the expected
results when used for the stronger camera shake that may occur when
shooting while walking or when moving the camera to match subject
movement. In this case, set Powered IS to [Off].
z z
Follow the steps in “Changing the IS
Mode Settings” (
=
78 ) to access the
[IS Settings] screen.
z z
Choose [Powered IS], and then choose
[Off] (
=
39 ).
•
[Powered IS] settings are not applied when [IS Mode] is set to [Off].