Canon PowerShot A4050 IS Page 105 User Manual Download

Page: 105 / 186

Shooting Range and Focusing

105

The focus can be locked. After you lock the focus, the focal position will not
change even when you release your finger from the shutter button.

Lock the focus.

With the shutter button pressed halfway,
press the

button.

The focus is now locked, and

displayed.

To unlock the focus, release the shutter
button and press the

button again. In this

case,

is no longer displayed.

Compose the shot and shoot.

You can also lock the focus by pressing and
holding the shutter button halfway, and then
touching the screen (inside the frame shown
at left).

To unlock the focus, release the shutter
button and touch the screen again. In this
case,

is no longer displayed.

Shooting with the AF Lock

Still Images

Movies

•

Cannot be used with Touch Shutter (p. 65).

Using the Touch-Screen Panel

A3400 IS

Summary of Contents for PowerShot A4050 IS



























































































































































































Search results

Summary of Contents for PowerShot A4050 IS

Reviews:

Related manuals for PowerShot A4050 IS

Brands by name

Popular brands

Canon PowerShot A4050 IS, User Manual

Search results

Summary of Contents for PowerShot A4050 IS

Reviews:

Related manuals for PowerShot A4050 IS

Brands by name

Popular brands