Canon PowerShot A3150 IS User Manual Download Page 126

Page: 126 / 147

126

Using Household Power

If you use AC

Adapter Kit ACK-DC60 (sold separately), you can use the

camera without worrying about how much charge is left in the battery.

Insert the coupler.

●

Open the cover

(p. 16)

and insert the

coupler as shown until it locks into place
with a click.

●

Close the cover

(p. 16)

Plug the cord into the coupler.

●

Open the cover and fully insert the plug into
the coupler.

Connect the power cord.

●

Connect the power cord to the compact
power adapter, then plug the other end into
a power outlet.

●

You can turn the camera on to use it.

●

After you finish, turn off the camera and
unplug the power cord from the power
outlet.

Terminals

Do not unplug the plug or power cord with the camera turned on. This
could erase images you have taken or damage the camera.

Summary of Contents for PowerShot A3150 IS




















































































































































Search results

Summary of Contents for PowerShot A3150 IS

Reviews:

Related manuals for PowerShot A3150 IS

Brands by name

Popular brands

Canon PowerShot A3150 IS, User Manual

Search results

Summary of Contents for PowerShot A3150 IS

Reviews:

Related manuals for PowerShot A3150 IS

Brands by name

Popular brands