Canon Power Shot G7X Page 178 User Manual Download

Page: 178 / 458

178

Contents

Moving and Resizing AF Frames (1-point)

Still Images

Movies

When you want to change the position or size of the AF frame, set
the AF frame mode to [1-point].

Move the AF frame.

Touch the screen. An AF frame
is displayed in orange where you
touched (Touch AF).

You can turn the [

] dial to move

the AF frame and press the
[

][

][ ][

] buttons to fine-tune

the position.

To return the AF frame to the
original position in the center,
press the [

] button.

Resize the AF frame.

To reduce the AF frame size,
turn the [ ] ring. Turn it again to
restore it to the original size.

Finish the setup process.

Press the [

] button.

●

AF frames are displayed at normal size when you use the digital
zoom (

79) or digital tele-converter (

176), and in manual

focus mode (

172).

Summary of Contents for Power Shot G7X











































































































































































































































































































































































































































































Search results

Summary of Contents for Power Shot G7X

Reviews:

Related manuals for Power Shot G7X

Brands by name

Popular brands

Canon Power Shot G7X, User Manual

Search results

Summary of Contents for Power Shot G7X

Reviews:

Related manuals for Power Shot G7X

Brands by name

Popular brands