manualshive.com logo in svg

Canon PIXMA TS9010, Online Manual, Page: 389 / 467

Share
Download
Canon PIXMA TS9010 Online Manual Download Page 389

Cannot Print on the Disc Label

Disc Label Printing Does Not Start
Disc Tray Does Not Feed Properly
Disc Tray Jammed

Disc Label Printing Does Not Start

Check1

 Is disc tray placed properly?

Place the disc tray properly again and tap 

OK

 on the touch screen.

Use the disc tray supplied with this printer ("M" is on the upper side).

For more on placing the disc tray, see 

Placing a Printable Disc

.

Check2

 Is printable disc placed on disc tray?

Place the printable disc on the disc tray properly and tap 

OK

 on the touch screen.

Use the disc tray supplied with this printer ("M" is on the upper side).

For more on placing the disc tray, see 

Placing a Printable Disc

.

Check3

 If disc label printing stops before it is complete, try operation again.

If a certain period of time has elapsed while disc label printing is in progress, the printer stops initializing.

To resume initializing, tap 

OK

 on the touch screen.

Try the operation again following the on-screen instructions.

Disc Tray Does Not Feed Properly

Check1

 Is disc tray placed properly?

Place the disc tray properly again and tap 

OK

 on the touch screen.

Make sure you are using the disc tray supplied with the printer ("M" is on the upper side).

For more on placing the disc tray, see 

Placing a Printable Disc

.

Check2

 Unrecognizable printable disc may be placed.

Canon recommends that you use printable discs specially processed to be printed on by an inkjet printer.

389

Summary of Contents for PIXMA TS9010




















































































































































































































































































































































































































































































Reviews:

No comments