manualshive.com logo in svg

Canon PIXMA TS9010, Online Manual, Page: 216 / 467

Share
Download
Canon PIXMA TS9010 Online Manual Download Page 216

Important

• When the 

Borderless Extension

 slider is set to the rightmost position, the back side of the

paper may become smudged.

4. Click 

Print

When you execute print, the data is printed without any margins on the paper.

Important

• Borderless printing only supports specific paper sizes. Make sure to select a paper size with the

wording "(borderless)" from the 

Paper Size

.

• When borderless printing is enabled, 

Other Fine Art Paper

, 

Envelope

, 

High Resolution Paper

, and

T-Shirt Transfers

 appear grayed out and are unavailable in 

Media Type

 list of 

Quality & Media

 of

the pop-up menu in the Print dialog.

• Print quality may deteriorate or the sheet may be stained at the top and bottom depending on the

type of paper used.

• When the ratio of the height to the width differs from the image data, a portion of the image may not

be printed depending on the size of the media used.
In this case, crop the image data with an application software according to the paper size.

• When scaled printing or page layout printing is enabled, you cannot perform borderless printing.

Note

• When 

Plain Paper

 is selected from the 

Media Type

 menu of the 

Quality & Media

, borderless

printing is not recommended.

Expanding the Range of the Document to Print

Setting a large amount of extension allows you to perform borderless printing with no problems. However,
the portion of the document extending off the paper range will not be printed and for this reason, the
subjects around the perimeter of a photo may not be printed.

216

Summary of Contents for PIXMA TS9010




















































































































































































































































































































































































































































































Reviews:

No comments