manualshive.com logo in svg

Canon PIXMA TS6100 series, Online Manual, Page: 154 / 435

Share
Download
Canon PIXMA TS6100 series Online Manual Download Page 154

Changing the Printer Operation Mode

If necessary, switch between various modes of printer operation.

 Custom Settings

1. Open the Canon IJ Printer Assistant Tool

2. Make sure that the printer is on, and then click 

Custom Settings

The 

Custom Settings

 dialog box opens.

Note

• If the printer is off or if communication between the printer and the computer is disabled, an

error message may appear because the computer cannot collect the printer status.
If this happens, click 

OK

 to display the most recent settings specified on your computer.

3. If necessary, complete the following settings:

Prevent paper abrasion

The printer can increase the gap between the print head and the paper during high-density
printing to prevent paper abrasion.
Check this check box to prevent paper abrasion.

Align heads manually

Usually, the 

Print Head Alignment

 function in the Canon IJ Printer Assistant Tool is set to

automatic head alignment, but you can change it to manual head alignment.
If the printing results of automatic print head alignment are not satisfactory, perform manual head
alignment.
Check this check box to perform the manual head alignment. Uncheck this check box to perform
the automatic head alignment.

Rotate 90 degrees left when orientation is [Landscape]

On the 

Page Setup

 tab, you can change the rotation direction of the 

Landscape

 in the

Orientation

.

To rotate the print data 90 degrees to the left during printing, select this item. To rotate the print
data 90 degrees to the right during printing, clear this item.

Important

• Do not change this setting while the print job is displayed in the print wait list. Otherwise,

characters may be omitted or the layout may become corrupt.

Don't detect mismatch of paper settings when printing from computer

When you print documents from your computer, the paper settings in the printer driver and the
paper information registered on the printer do not match, this setting disables the message
display and allows you to continue printing.
To disable detection of paper setting mismatches, select this check box.

154

Summary of Contents for PIXMA TS6100 series




















































































































































































































































































































































































































































Reviews:

No comments