Canon PIXMA TS5000 Series Online Manual Download Page 305

Page: 305 / 441

Basic Mode Tab

Use the

Basic Mode

tab to scan easily by following these simple on-screen steps.

This section describes the settings and functions available on the

Basic Mode

tab.

(1) Settings and Operation Buttons
(2) Toolbar
(3) Preview Area

Note

• The displayed items vary by document type and view.
• Preview is not available when scanning from the ADF (Auto Document Feeder).

(1) Settings and Operation Buttons

Select Source

Photo (Color)

Scan color photos.

Magazine (Color)

Scan color magazines.

Document (Color)

Scan documents in color.

Document (Grayscale)

Scan documents in black and white.

Document (Color) ADF Simplex

Scan documents from the ADF in color.

Document (Grayscale) ADF Simplex

Scan documents from the ADF in black and white.

Document (Color) ADF Duplex (only for models supporting ADF duplex scanning)

Scan both sides of documents from the ADF in color.

305

Summary of Contents for PIXMA TS5000 Series


























































































































































































































































































































































































































































Search results

Summary of Contents for PIXMA TS5000 Series

Reviews:

Brands by name

Popular brands

Canon PIXMA TS5000 Series, Online Manual

Search results

Summary of Contents for PIXMA TS5000 Series

Reviews:

Brands by name

Popular brands