Canon Pixma TR7600 Series Online Manual Download Page 109

Page: 109 / 563

Checking Ink Status on the Touch Screen

Check that printer is turned on, and display the HOME screen.

If the HOME screen is not displayed, press the

HOME

button to display it.

Select

(Hint) on HOME screen.

Using Touch Screen

The hint menu screen will appear.

Select

Estimated ink levels

A symbol appears in the area A if there is any information about the remaining ink level.

The ink is running low. Prepare a new ink tank.

Ink has run out. Replace the ink tank with a new ink tank.

This appears when remaining ink level is not known.

Note

• The above screen shows estimated ink levels.

• To access the ink purchasing site, select

Order ink now

on this screen and display the QR code.

Cost of connecting to Internet is to be born by the customer.

• Selecting

Ink model no.

displays the

Ink model number

screen for checking ink numbers.

• You can also check the ink status on a screen of the touch screen displayed while printing.

• You can also check the ink status on the computer screen.

For Windows:

Checking Ink Status from Your Computer

For macOS:

Checking Ink Status from Your Computer

109

Summary of Contents for Pixma TR7600 Series




















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Pixma TR7600 Series

Reviews:

Related manuals for Pixma TR7600 Series

Brands by name

Popular brands

Canon Pixma TR7600 Series, Online Manual

Search results

Summary of Contents for Pixma TR7600 Series

Reviews:

Related manuals for Pixma TR7600 Series

Brands by name

Popular brands