manualshive.com logo in svg

Canon Pixma TR7600 Series, Online Manual, Page: 247 / 563

Share
Download
Canon Pixma TR7600 Series Online Manual Download Page 247

Checking Ink Status from Your Computer

You can check the remaining ink level and the ink tank types for your model.

1.

Open the 

printer driver setup window

2.

Launching the Canon IJ Status Monitor

On the 

Maintenance

 tab, click 

View Printer Status

.

3.

Display 

Estimated ink levels

Ink status is displayed as an illustration.

Note

• The information displayed on the Canon IJ Status Monitor may differ depending on the country or

region where you are using your printer.

247

Summary of Contents for Pixma TR7600 Series




















































































































































































































































































































































































































































































































































































Reviews:

No comments