Canon PIXMA TR7022 Online Manual Download Page 44

Page: 44 / 346

Connecting with Wireless Direct

You can connect devices (e.g. computer, smartphone, or tablet) to the printer by two methods below.

• Wireless connection (connecting devices via a wireless router)

• Direct wireless connection (connecting devices directly without a wireless router)

This section describes Wireless Direct, which allows you to print by connecting the devices to the printer
directly.

Follow the procedure below to set up and use Wireless Direct.

1. Preparing the printer.

Changing Printer Setting to Use Wireless Direct

2. Preparing a device to connect to the printer.

Connecting a smartphone/tablet/computer to the printer

Important

• You can connect up to 5 devices to the printer at the same time with Wireless Direct.

• Check the usage restrictions and switch the printer to the Wireless Direct.

Restrictions

Changing Printer Setting to Use Wireless Direct

Make sure the printer is turned on.

Press the

button on HOME screen.

Select

Device settings

and press the

button.

Select

LAN settings

and press the

button.

Select

Wireless Direct

and press the

button.

Select

Advanced mode

and press the

button.

Select

Next

and press the

button.

Select

and press the

button.

The Wireless Direct is enabled and a device can be connected to the printer wirelessly.

Note

• To show the password, select

. To hide the password, select

OFF

Summary of Contents for PIXMA TR7022



























































































































































































































































































































































Search results

Summary of Contents for PIXMA TR7022

Reviews:

Canon PIXMA TR7022, Online Manual, Page: 44 / 346

Search results

Summary of Contents for PIXMA TR7022

Reviews: