Advanced Settings of Receive Mode
You can specify the advanced settings of each receive mode.
This section describes the procedure to specify the advanced settings of the receive mode and the setting
items.
Specify the advanced settings following the procedure below.
1.
Make sure that the machine is turned on.
Confirming that the Power Is On
2.
Press the
FAX
button.
The Fax standby screen is displayed.
3.
Press the center
Function
button.
The
Receive mode settings
screen is displayed.
4.
Use the
button to select a receive mode, then press the right
Function
button.
5.
Use the
button to select a setting item, then press the
OK
button.
6.
Use the
button to specify the setting, then press the
OK
button.
Depending on the setting items, the related setting items are displayed after you specify the setting of
the advanced settings and press the
OK
button. Use the
button again to specify the setting, then
press the
OK
button.
For details on advanced settings of each receive mode, see below.
Note
Refer to
for information on receiving faxes or the procedure for each receive mode.
DRPD
is available only in the US and Canada.
Network switch
may not be available depending on the country or region of purchase.
Advanced setting in TEL priority mode
You can specify the following setting items.
•
Manual/auto switch
If you select
ON
, the machine automatically receives faxes after the external device rang a specified
length of time.
You can specify the length of time until automatic reception is started.
•
User-friendly reception
If you select
ON
, the machine automatically switches from telephone calling to fax reception by
detecting the fax signal (CNG signal) when you lift the handset of the telephone or the answering
machine answers. When you have an answering machine connected to the machine, select
ON
to
switch to fax reception automatically after the answering machine answers.
If you select
OFF
, the machine does not switch from telephone calling to fax reception automatically
even if the machine detects the fax signal (CNG signal). Select
OFF
if you want the machine not to
switch automatically during a call.
Note
If you subscribe to Duplex Ringing service in Hong Kong, the number of times the external device
rings specified with
Incoming ring
in
FAX only mode
is available in
TEL priority mode
.