manualshive.com logo in svg

Canon PIXMA MP990, Getting Started Manual

Share
Download
Canon PIXMA MP990 Getting Started Manual Download Page 18

2

1

A

1

2

USB Connection

Install the Software

Turn on the computer, then 

insert the 

Setup CD-ROM

 into 

the CD-ROM drive.

If the program does not start automatically, double-click the CD-ROM 

icon in 

Computer

 or 

My Computer

.  

When the CD-ROM contents appear, double-click 

MSETUP4.EXE

.

•

TURN OFF THE 

MACHINE (A).

Operating noise continues 

for about 30 seconds until 

the machine turns off.

•

Connect the machine to 

the computer with a USB 

cable.

Make sure the machine is 

turned on.

The USB Port is located on 

the right side at the back of 

the machine. The lower port 

is for USB.

•

Turn on the computer, then 

insert the 

Setup CD-ROM

 into 

the CD-ROM drive.

The setup program will start 

automatically.

For Windows Vista/

XP

□

If you are using Internet 

Explorer 7 or later, 

you can use the Web 

print software Easy-

WebPrint EX. An internet 

connection is required 

for installation. (It is also 

possible to install this 

software later.)

Summary of Contents for PIXMA MP990


































































Reviews:

No comments

Brands by name

Popular brands

Load more brands