manualshive.com logo in svg

Canon PIXMA MP640, Service Manual, Page: 41 / 57

Share
Download
Canon PIXMA MP640 Service Manual Download Page 41

4.  ADJUSTMENT / SETTINGS 

4-1.  User Mode  

 
 

MP640 / MP648

TABLE OF CONTENTS

Function

Procedures

Remarks

Nozzle check 
pattern printing

Perform via the machine 
operation panel, or from the MP 
driver Maintenance tab. 

Set a sheet of plain paper (A4 or Letter) in the cassette, or the rear tray 
if selected.

Print head 
manual cleaning

- Cleaning both Black and Color: 

Perform via the machine 
operation panel. 

- Cleaning Black or Color 

separately, or both Black and 
Color:  

Perform from the MP driver 
Maintenance tab. 

Unclogging of the print head nozzles, and maintenance to keep the 
print head conditions good. 
If there is a missing portion or white streaks in the nozzle check pattern 
printout, perform this cleaning.

Print head deep 
cleaning

Perform via the machine 
operation panel, or from the MP 
driver Maintenance tab. 

If print head manual cleaning is not effective, perform this cleaning. 
Since the deep cleaning consumes more ink than regular cleaning, it is 
recommended to perform deep cleaning only when necessary.

Automatic print 
head alignment

Perform via the machine 
operation panel, or from the MP 
driver Maintenance tab. 

Set a sheet of Matte Photo Paper MP-101 (A4) in the rear tray. If the 
automatic print head alignment is not effective, perform manual print 
head alignment.

Manual print 
head alignment

Perform via the machine 
operation panel, or from the MP 
driver Maintenance tab. 

Set 3 sheets of plain paper (A4 or Letter) in the cassette, or the rear 
tray if selected.

Print head 
alignment value 
printing

Perform via the machine 
operation panel, or from the MP 
driver Maintenance tab. 

Confirmation of the current print head alignment values.

Paper feed roller 
cleaning

Perform via the machine 
operation panel, or from the MP 
driver Maintenance tab.

The paper feed rollers of the selected paper source (the rear tray or the 
cassette) rotate while being pushed to the paper lifting plate. Since the 
rollers will wear out in this cleaning, it is recommended that you 
perform this only when necessary.

Bottom plate 
cleaning

Perform via the machine 
operation panel, or from the MP 
driver Maintenance tab. 

Cleaning of the platen ribs when the back side of paper gets smeared. 
Fold a sheet of plain paper (A4 or Letter) in half crosswise, then unfold 
and set it in the rear tray with the folded ridge facing down. (No paper 
feeding from the cassette) 

38 / 54

Summary of Contents for PIXMA MP640


























































Reviews:

No comments