Canon PIXMA MP530, Quick Start Manual, Page: 20 / 200

18
Introduction Chapter 1
EN
GLIS
H
Operation Panel Name and Functions
(1) [ON/OFF] Turns the machine ON and OFF. Before turning ON the machine, make
sure the Document Cover is closed.
(2) [COPY] Switches the machine to the Copy mode. Flashes when the machine is
turned on.
(3) [FAX] Switches the machine to the Fax mode.
(4) In Use/Memory
Lamp Flashes when the telephone line is in use. Lights when there are documents
stored in the machine's memory.
(5) [SCAN] Switches the machine to the Scan mode. This button is used when the
machine is connected to a computer (Refer to the
Scan Guide ).
(6) Alarm Lamp Lights or flashes orange, when an error occurs, or when paper or ink has run
out.
(7) [Exposure] Sets the copy intensity and fax intensity.
(8) [Enlarge/Reduce] Sets the reduction or enlargement ratio for copying.
(9)
LCD (Liquid Crystal
Display) Displays messages, menu selections, and the operation status.
(10)
[Menu] Displays menus to configure copy, fax, or machine settings.
(11) Numeric Buttons Enters numerical values such as the number of copies, as well as fax/
telephone numbers and characters.
(12) [Redial/Pause] Redials the last dialed number using numeric buttons. Also enters pauses
between or after numbers when dialing or registering numbers.
(13) [Coded Dial] Press this button and a two-digit code to dial a pre-registered fax/telephone
number.
(14) [Tone] Switches temporarily to tone dialing. Also changes the mode when entering
characters.
(10)
(19)
(2) (3)
(4)
(9) (11) (1) (5) (7) (8)
(24) (22) (20) (18) (17) (14)
(6)
(15)
(12)
(13)
(16) (23) (21) (26) (25)