manualshive.com logo in svg

Canon PIXMA MG5600 Series, Online Manual

Share
Download
Canon PIXMA MG5600 Series Online Manual Download Page 95

Troubleshooting Canon Inkjet Cloud Printing Center

If an app cannot be installed
If the registered app is not in the Apps list
If the information is not updated when you press the 

Update

 button

If you do not receive the registration e-mail
Printing starts on its own even if you do not do anything
If you are unable to log in correctly even after entering the correct password in iOS or Mac

If an app cannot be installed

Check the country or region where the printer was purchased.
If the printer is taken outside the country or region where it was purchased, apps cannot be installed.

If the registered app is not in the Apps list

Check the display language of Canon Inkjet Cloud Printing Center.
If the display language is switched to a language that does not support an app, the app will not be
displayed in the apps list but will continue to be registered.
If you switch back to the target language of the app, it will be displayed in the apps list and you will be
able to start, register, or unregister the app.

If the information is not updated when you press the Update button

Because the Properties screen requires network connection with this product, the information may not be
reflected immediately. Please wait awhile, and then try updating the information again.
If the information is still not updated, then check that the product is connected to the Internet.

If you do not receive the registration e-mail

You may have entered a different e-mail address during the user registration of Canon Inkjet Cloud
Printing Center.

On the printer's Home screen, select 

 

Setup

 -> 

 

Web service setup

 -> 

Web service

connection setup

 -> 

IJ Cloud Printing Center setup

 -> 

Delete from this service

 to delete the service

registration.
After resetting the printer, repeat the user registration of Canon Inkjet Cloud Printing Center from the
beginning.

Printing starts on its own even if you do not do anything

A third party may be able to illegally use the Canon Inkjet Cloud Printing Center services.

On the printer's Home screen, select 

 

Setup

 -> 

 

Web service setup

 -> 

Web service

connection setup

 -> 

IJ Cloud Printing Center setup

 -> 

Delete from this service

 to delete the service

registration.
After resetting the printer, repeat the user registration of Canon Inkjet Cloud Printing Center from the
beginning.

95

Summary of Contents for PIXMA MG5600 Series















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands