Canon PIXMA MG5600 Series Online Manual Download Page 202

Page: 202 / 910

Aligning the Print Head Position from Your Computer

Print head alignment corrects the installation positions of the print head and improves deviated colors and
lines.

This printer supports two head alignment methods:

automatic head alignment

and manual head alignment.

The procedure for performing manual print head alignment is as follows:

Print Head Alignment

1. Open the

printer driver setup window

2. Click

Custom Settings

on the

Maintenance

tab

The

Custom Settings

dialog box opens.

3. Switch head alignment to manual

Check the

Align heads manually

check box.

4. Apply the settings

Click

and when the confirmation message appears, click

5. Click

Print Head Alignment

on the

Maintenance

tab

The

Start Print Head Alignment

dialog box opens.

6. Load paper in the printer

Load two sheets of A4 size or Letter size plain paper into the cassette.

Note

• If the cassette paper information registered on the printer is not set to A4 size and plain paper,

an error may occur. For instructions on what to do if an error occurs, see "

Paper setting for

Printing

For details about the cassette paper information to be registered on the printer, see the
following:

•

Paper Settings on the Printer Driver and the Printer (Media Type)

•

Paper Settings on the Printer Driver and the Printer (Paper Size)

7. Execute head alignment

Make sure that the printer is on and click

Align Print Head

Follow the instruction in the message.

Important

• Do not open the operation panel while printing is in progress.

202

Summary of Contents for PIXMA MG5600 Series















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PIXMA MG5600 Series

Reviews:

Brands by name

Popular brands

Canon PIXMA MG5600 Series, Online Manual

Search results

Summary of Contents for PIXMA MG5600 Series

Reviews:

Brands by name

Popular brands