manualshive.com logo in svg

Canon PIXMA MG5600 Series, Online Manual

Share
Download
Canon PIXMA MG5600 Series Online Manual Download Page 491

Paper setting for Printing

By registering the paper size and the media type loaded in the cassette, you can prevent the machine from
misprinting by displaying the message before printing starts when the paper size or the media type of the
loaded paper differs from the print settings.

•

When you load paper in the cassette:

The screen to register the cassette paper information is displayed.

Register the paper size and the media type according to the loaded paper.

Important

• For details on the proper combination of paper settings you can specify by the printer driver or on

the LCD:

Setting the Media Type with the Printer Driver and on the Printer

Setting the Paper Size with the Printer Driver and on the Printer

• For copying, specify the paper settings for copying so that they match the cassette paper

information.

Note

• Depending on the registered cassette paper information, the screen to confirm if you apply the

registered information to the paper settings for copying is displayed. If you select 

Yes

, the

information is applied to the paper settings for copying.

•

When the paper settings for printing or copying are different from the cassette paper information
registered to the machine:

Ex:

◦ Paper setting for printing or copying: B5

491

Summary of Contents for PIXMA MG5600 Series















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands