Using the Machine from Additional Computers
6
<< Previous
Next >>
Installing the PIXMA MG3120 on Additional Computers
If your printer is already set up on your network, and you wish to use the printer from additional computers, you only need to install the printer software
on the other computers. There are no further settings that need to be performed on the printer, and the printer does not have to be connected with the
USB cable.
A step-by-step walk through of the wireless setup is built in to the installation routine of the software that shipped with your PIXMA.
*Insert the Setup CD-ROM
that came with your printer into your CD-ROM drive and proceed through the easy to follow instructions.
*If you don’t have or cannot use the Setup CD-ROM, you can still install the printer using a downloaded file.
Click here for information
.
Be sure to select
Wireless Connection
on the Connection Method Selection screen (1-2).
Follow any on-screen instructions until the
Completion of Connection
screen (1-4) appears. This is shown on the next page.