manualshive.com logo in svg

Canon PIXMA G6000 Series, Online Manual, Page: 440 / 492

Share
Download
Canon PIXMA G6000 Series Online Manual Download Page 440

See 

Unplugging the Printer

 for unplugging the power cord.

Writing Error/Output Error/Communication Error (Windows)

Check1

 If the 

ON

 lamp is off, make sure printer is plugged in and turn on.

The 

ON

 lamp flashes while the printer is initializing. Wait until the 

ON

 lamp stops flashing and remains lit.

Check2

 Make sure printer is properly connected to computer.

If you are using a USB cable, make sure it is securely connected to both the printer and the computer. When
the USB cable is securely plugged in, check the following:

• If you are using a relay device such as a USB hub, disconnect it, connect the printer directly to the

computer, and retry the printing. If printing starts normally, there is a problem with the relay device.
Contact the vendor of the relay device.

• There could also be a problem with the USB cable. Replace the USB cable and retry the printing.

If you use the printer over a LAN, make sure the printer is correctly set up for network use.

Check3

 Make sure MP Drivers is installed correctly.

Uninstall the MP Drivers following the procedure described in Deleting the Unnecessary MP Drivers and
reinstall it from the Setup CD-ROM or the Canon website.

Check4

 When printer is connected to your computer with a USB cable, check device

status from your computer.

Follow the procedure below to check the device status.

1. Select 

Control Panel

 > 

Hardware and Sound

 > 

Device Manager

.

Note

• If the 

User Account Control

 screen appears, select 

Continue

.

2. Double-click 

Universal Serial Bus controllers

 and 

USB Printing Support

.

If 

USB Printing Support Properties

 screen does not appear, make sure the printer is correctly

connected to the computer.

Check2

 Make sure printer is properly connected to computer.

3. Click 

General

 tab and check for a device problem.

If a device error is shown, see Windows Help to resolve it.

440

Summary of Contents for PIXMA G6000 Series













































































































































































































































































































































































































































































































Reviews:

No comments