Canon PIXMA G5000 Series Online Manual Download Page 34

Page: 34 / 422

Printing Photos from a Smartphone/Tablet

This section describes how to print photos with Canon PRINT Inkjet/SELPHY.

For details on how to download Canon PRINT Inkjet/SELPHY, see below.

Print Photos from Your Smartphone

Open rear tray cover (A). Pull straight up and fold back paper support (B).

Open the feed slot cover (C).

Slide right paper guide (D) to open both paper guides.

Load photo paper in portrait orientation WITH PRINT SIDE FACING UP.

Summary of Contents for PIXMA G5000 Series







































































































































































































































































































































































































































Search results

Summary of Contents for PIXMA G5000 Series

Reviews:

Related manuals for PIXMA G5000 Series

Brands by name

Popular brands

Canon PIXMA G5000 Series, Online Manual

Search results

Summary of Contents for PIXMA G5000 Series

Reviews:

Related manuals for PIXMA G5000 Series

Brands by name

Popular brands