Canon PIXMA G5000 Series Online Manual Download Page 150

Page: 150 / 422

Front View

A: Top Cover

Open to refill ink tanks and to remove jammed paper.

B: Paper Support

Extend to load paper in the rear tray.

C: Rear Tray Cover

Open to load paper in the rear tray.

D: Paper Guides

Align with both sides of the paper stack.

E: Feed Slot Cover

Prevents anything from falling into the feed slot.

Open it to slide the paper guides, and close it before printing.

F: Rear Tray

Load paper here. Two or more sheets of the same size and type of paper can be loaded at the same
time, and fed automatically one sheet at a time.

Loading Paper in the Rear Tray
Loading Envelopes in Rear Tray

G: Cassette

Load A4, B5, A5, or Letter-sized plain paper into the cassette, and insert it into the printer.

Loading Paper in the Cassette

H: Paper Guides

Align with right/left/front sides of the paper stack.

I: Paper Output Tray

Printed paper is ejected. Pull out it before printing.

150

Summary of Contents for PIXMA G5000 Series







































































































































































































































































































































































































































Search results

Summary of Contents for PIXMA G5000 Series

Reviews:

Related manuals for PIXMA G5000 Series

Brands by name

Popular brands

Canon PIXMA G5000 Series, Online Manual

Search results

Summary of Contents for PIXMA G5000 Series

Reviews:

Related manuals for PIXMA G5000 Series

Brands by name

Popular brands