Canon PIXMA G3070 Series Online Manual Download Page 443

Page: 443 / 472

What to Do When Paper Is Jammed

If a paper jam occurs during printing (when the support code 1300 is displayed), follow the procedure below.

Note

• If the paper is not jammed (no support code displayed) but the paper is not fed or output normally, see

What to Do If Paper Is Not Fed/Output Normally.

Important

• When checking the paper output slot / feed slot or removing any foreign objects, do not turn the printer

upside down or tilt it. The ink may leak out.

Check 1

Did you try to print on a small paper size such as

4"x6" 10x15cm

Card

size?

What to Do When Small Paper Sizes Are Jammed

Check 2

Is the jammed paper visible in the paper output slot (A)?

Removing Jammed Paper through Paper Output Slot

Check 3

Are there any foreign objects in the feed slot of the rear tray (B)?

What to Do If Paper Is Not Fed/Output Normally

Check 4

Is the jammed paper visible in the feed slot (B)?

Remove any paper other than the jammed paper on the rear tray, and then check if the jammed paper is visible
in the feed slot.

Removing Jammed Paper through Feed Slot

Check 5

If the jammed paper is not visible in the paper output slot or the feed slot.

Removing Jammed Paper inside Printer

443

Summary of Contents for PIXMA G3070 Series

























































































































































































































































































































































































































































































Search results

Summary of Contents for PIXMA G3070 Series

Reviews:

Related manuals for PIXMA G3070 Series

Brands by name

Popular brands

Canon PIXMA G3070 Series, Online Manual

Search results

Summary of Contents for PIXMA G3070 Series

Reviews:

Related manuals for PIXMA G3070 Series

Brands by name

Popular brands