manualshive.com logo in svg

Canon PIXMA G2060 Series, Online Manual

Share
Download
Canon PIXMA G2060 Series Online Manual Download Page 65

Deep Print Head Cleaning

If print quality does not improve by the standard cleaning of the print head, clean the print head deeply.
Cleaning the print head deeply consumes more ink than the standard cleaning of the print head, so clean
the print head deeply only when necessary.

1.

Check that printer is turned on.

2.

Press the 

Setup

 button, use the     button to select 

Maintenance

, and press the 

OK

button.

LCD and Operation Panel

3.

Use     button to select 

Deep Cleaning

 and press 

OK

 button.

The printer starts cleaning the print head deeply.

Do not perform any other operations until the printer completes the deep cleaning of the print head. This
takes about 2 to 3 minutes.

4.

Check the print head condition.

To check the print head condition, 

print the nozzle check pattern

.

If the problem is not resolved, turn off the power and clean the print head deeply again after 24 hours.

65

Summary of Contents for PIXMA G2060 Series
















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands