manualshive.com logo in svg

Canon PIXMA G2060 Series, Online Manual

Share
Download
Canon PIXMA G2060 Series Online Manual Download Page 62

Printing the Nozzle Check Pattern

Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzle.

Note

• If the remaining ink level is low, the nozzle check pattern will not be printed correctly. If the remaining

ink level is low, 

refill ink tanks

.

You need to prepare: a sheet of A4 or Letter-sized plain paper

1.

Check that printer is turned on.

2.

Load a sheet of A4 or Letter-sized plain paper in the rear tray.

Loading Plain Paper / Photo Paper

3.

Press the 

Setup

 button, use the     button to select 

Maintenance

, and press the 

OK

button.

LCD and Operation Panel

4.

Use the     button to select 

Nozzle check

 and press the 

OK

 button.

The nozzle check pattern will be printed.

Do not perform any other operations until the printer completes the printing of the nozzle check pattern.

5.

Examine the nozzle check pattern

.

62

Summary of Contents for PIXMA G2060 Series
















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands