Canon PIXMA G2020 Series Online Manual Download Page 312

Page: 312 / 347

Message (Support Code) Appears

This section describes some of the messages that may appear.

Note

• A support code (error number) is displayed for some errors. For details on errors that have support

code, see

List of Support Code for Error

If a message appears on the printer's LCD, see below.

Message Appears on Printer's LCD

If a message appears on the computer, see below.

Error Regarding Power Cord Being Unplugged Is Displayed (Windows)
Writing Error/Output Error/Communication Error (Windows)
Other Error Messages (Windows)

Message Appears on Printer's LCD

Check the message and take appropriate action.

•

Cannot connect to the server; try again

The printer cannot connect to the server due to a communication error.

Press the printer's

button to cancel the error and try again after a while.

Error Regarding Power Cord Being Unplugged Is Displayed (Windows)

The printer may have been unplugged while it was on.

Check the error message that appears on the computer and click

The printer starts printing.

See

Unplugging the Printer

for unplugging the power cord.

Writing Error/Output Error/Communication Error (Windows)

Check1

If the

lamp is off, make sure printer is plugged in and turn on.

The

lamp flashes while the printer is initializing. Wait until the

lamp stops flashing and remains lit.

Check2

Make sure USB cable is securely plugged in to printer and computer.

When the USB cable is securely plugged in, check the following:

• If you are using a relay device such as a USB hub, disconnect it, connect the printer directly to the

computer, and retry the printing. If printing starts normally, there is a problem with the relay device.
Contact the vendor of the relay device.

• There could also be a problem with the USB cable. Replace the USB cable and retry the printing.

Check3

Make sure MP Drivers are installed correctly.

312

Summary of Contents for PIXMA G2020 Series




























































































































































































































































































































































Search results

Summary of Contents for PIXMA G2020 Series

Reviews:

Canon PIXMA G2020 Series, Online Manual, Page: 312 / 347

Search results

Summary of Contents for PIXMA G2020 Series

Reviews: