Canon PIXMA G1411, Online Manual, Page: 204 / 231

An Error Occurs
When an error occurs in printing such as the printer is out of paper or paper is jammed, the Alarm lamp
flashes or ON lamp and Alarm lamp flash alternately according to the details of the error which has
occurred. A Support Code (error number) is displayed on the computer screen shown as below.
Check the status of the Alarm lamp and the support code, then take the appropriate action.
Support Code Corresponding to Number of Flashes of Alarm Lamp
Example of 2 times flashing:
(A) Flashes
(B) Goes off
Number of
flashes Cause Support Code
2 flashes Printer is out of paper or paper does not feed. 1000
3 flashes Paper is jammed at the paper output tray or on the rear tray. 1300
4 flashes Cartridge is not installed properly. 1470
5 flashes Cartridge cannot be recognized. 1403
A problem has occurred to cartridge. 1430
Cartridge is not installed. 1471
Appropriate cartridge is not installed. 1476
7 flashes Cartridge is not installed in correct position. 1474
More than one cartridge of the same color is installed. 1475
8 flashes Ink absorber is almost full. 1700
1701
9 flashes Protective material or tape may still be attached to FINE cartridge holder. 1890
14 flashes Cartridge cannot be recognized. 1473
15 flashes Cartridge cannot be recognized. 1472
204