
If remaining ink level notification function is enabled
Resetting the remaining ink level count when a remaining ink error occurs
If the remaining ink level notification function is enabled, the
Alarm
lamp flashes when ink runs low. This
function is enabled by default. Refill all four ink tanks until full and then reset the remaining ink level count.
• To continue enabling the remaining ink level notification function
Press and hold
RESUME/CANCEL
button for more than 5 seconds.
The
Alarm
lamp turns off and the remaining ink level count is reset.
• To disable the remaining ink level notification function
Press
RESUME/CANCEL
button and release it immediately.
The
Alarm
lamp turns off and the remaining ink level notification function is disabled.
Resetting the remaining ink level count when a remaining ink error has not
occurred
If you refill ink tanks when remaining ink level notification function is enabled and when the remaining ink
error has not occurred, refill all four ink tanks until full and then reset the remaining ink level count.
• To continue enabling the remaining ink level notification function
Press and hold
RESUME/CANCEL
button and release it when
Alarm
lamp flashes 11 times.
The remaining ink level count is reset.
• To disable the remaining ink level notification function
Press and hold
RESUME/CANCEL
button and release it when
Alarm
lamp flashes 10 times.
The remaining ink level notification function is disabled.
Important
• If the remaining ink level notification function is disabled, visually inspect the remaining ink and refill
the ink tanks as necessary. Continuing printing with ink below the lower limit line of an ink tank may
prevent satisfactory print quality or may cause malfunction or damage to the printer.
Note
• You can also set the remaining ink level notification function or reset the remaining ink level count
from your computer.
Changing the remaining ink level notification setting
Notes on ink bottles
Important
• Keep out of reach of children.
• Do not drink ink.
• Be careful not to get any ink in your eyes or in your mouth. (In case of eye contact or swallowing,
rinse with water and contact a doctor immediately).
• When you store ink bottles, close bottle caps completely and place bottles in standing position. If the
ink bottles are laid down, ink may leak.
• When refilling ink tanks, take sufficient care to prevent ink from spattering onto surroundings.
42
Summary of Contents for PIXMA G1411
