3
ENGLISH
6
Pour all ink into the ink tank
.
Confirm that the ink has been filled to the upper
limit line )A(
.
)A(
7
Replace the tank cap securely.
8
Close the ink tank cover
.
9
Repeat steps 2 to
8
to pour all ink into the
corresponding ink tanks on the right according to
the label.
Confirm that the ink has been filled to the upper
limit line )A(
.
)A(
10
Close the top cover
.
6
. Preparing the Ink System
1
Press the
RESUME/CANCEL
button, and then
confirm that the
ON
lamp has changed from lit to
flashing.
Ink preparation takes about
5
to 6 minutes.
Proceed to the next page.
The Alarm lamp is flashing
Count the number of flashes to determine the cause
of the problem.
•
4
times
The cartridges are not installed correctly.
"
3
. Installing the Cartridge" on page
1
•
5
times
No cartridges are installed.
"
3
. Installing the Cartridge" on page
1
• 9 times
The protective materials are not removed.
"2. Removing Packing Materials" on page
1
The
ON
lamp is flashing
Preparing the ink system. This may take about
5
to 6
minutes. Proceed to the next page.
The
ON
lamp and Alarm lamp flash alternately
8
times
Ink is not prepared normally.
Press the
ON
button to restart the printer, and then
redo the procedure from "
5
. Pouring Ink" on page 2
.
For all other cases, refer to the
Online Manual
.
When a lamp is flashing