Canon Perfect Binder-C1, Replacement Manual

Page: 38 / 54

Chapter 2
2-20
5) Remove the arm springs [1] and shaft spring [2], and then take out the
transport driven roller 2.
F-2-83
F-2-84
2.1.36 Before replacing the transport driven roller 2
(Spine bending unit (right)) (15 million sheets)
0024-6858
1) Remove the rear cover.
(page 2-4)
Reference[Removing the Rear Cover]
2) Draw out the cover transport assembly.
(page 2-5)
Reference[Drawing
out the Cover Transport Assembly]
3) Remove the cover horizontal registration unit.
(page 2-6)
Reference[Re-
moving the Cover Horizontal Registration Unit]
2.1.37 Transport driven roller 2 (Spine bending unit
(right)) (15 million sheets)
0024-6859
1) Open the transport roller 2/3 unit [1].
F-2-85
2) Remove the harness protection cover [1].
- Screw [2]
F-2-86
3) Remove the two connectors [1], and then release the harness from the two
edge saddles [2].
F-2-87
NOTE:
There is a groove on the roller shaft to slide the slit of the roller shaft mount.
Remove and install the transport driven roller sliding the groove.
[1]
[2]
[1]
[1]
[1]
[2]
[1]
[2]