Tower Bridge, England: Assembly Instructions
* Build two sets of all the parts on sheets 7 and 8.
* Build two sets of all the parts on sheets 5 and 6.
Position in place at the opening.
At this time, adjust the bridge to minimize distortion.
Be careful to ensure parts
18 and 19 do not protrude!
Check to make sure
the bridge can move when
attaching the bridge girders.
Glue in place so that the part shown
in the illustration protrudes.
Make sure parts 26 and 27 are correctly oriented
The cut end is straight
The cut end features a notch
Canon
®
is a registered trademark of Canon Inc.
©
Canon Inc.
©
T.Ichiyama
