COPYRIGHT © CANON ELECTRONICS INC. 2012
CANON P-208 FIRST EDITION
3-3
CHAPTER 3 DISASSEMBLY & REASSEMBLY
II. UPPER UNIT
1. Entire Upper Unit
1) Remove the pickup tray.
2) Remove the FPC
{
1
connected to the CIS
unit.
Note:
Handle the FPC carefully so that it is not
bent.
Figure 3-201
3) Release the right and left locks of the upper
unit
{
1
, unhook the fitting parts
{
2
on the
FPC side and then unhook the fitting parts
on the opposite side while opening them
slightly.
Figure 3-202
Notes on assembling
Do not get the FPC caught when hooking
the fitting parts on the FPC side.
Insert the FPC
{
1
between the guide
plates
{
2
.
Figure 3-203