Canon Optura 30 - optura 30 minidv camcorder Instruction Manual Download Page 113

Page: 113 / 166

113

Using a Memory Car

❍

Images not recorded with this camcorder, uploaded from a computer (except
the sample images

119), edited on a computer and images whose file

names have been changed may not be played back correctly.

❍

Do not turn off the camcorder, change the position of the TAPE/CARD switch,
disconnect the power source, open the memory card cover or remove the
memory card while the card access indicator is flashing. Doing so could result
in data damage.

Slide Show

1. Press the SLIDE SHOW button.

Images are played back one after another.

2. Press the SLIDE SHOW button to stop the slide show.

Index Screen

1. Move the zoom lever toward

Up to 6 images appear.

2. Turn the SET dial to select an image.

• Move the

to the image you wish to view.

• You can switch between the index pages by pressing the CARD

+ or CARD – button.

3. Move the zoom lever toward

The index screen is cancelled and the selected image is displayed.

CARD PLAY

CARD CAMERA

PLAY (VCR)

CAMERA

CARD PLAY

CARD CAMERA

PLAY (VCR)

CAMERA

Summary of Contents for Optura 30 - optura 30 minidv camcorder







































































































































































Search results

Summary of Contents for Optura 30 - optura 30 minidv camcorder

Reviews:

Related manuals for Optura 30 - optura 30 minidv camcorder

Brands by name

Popular brands

Canon Optura 30 - optura 30 minidv camcorder, Instruction Manual

Search results

Summary of Contents for Optura 30 - optura 30 minidv camcorder

Reviews:

Related manuals for Optura 30 - optura 30 minidv camcorder

Brands by name

Popular brands